Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

燃烧火焰温度分布重建结果误差分析

分析了采用辐射型CT算法的燃烧火焰温度发布重建结果误差产生的原因，给出了解决方法。     

利用小波包分解算法进行原子钟信号的消噪处理

高准确度时间在国防、科研等领域正在发挥着日益重要的作用 ,要提高计算原子时的准确度 ,消除原子钟信号的噪声是关键的步骤之一。为此 ,我们利用小波包分解算法对原子钟信号进行了必要的消噪处理 ,这样我们得到了平稳的原子钟信号 ,利用这些数据重新计算国家授时中心原子时TA(NTSC) ,计算结果表明经过消噪处理提高了TA(NTSC)稳定度和准确度 ,可以考虑进一步在我国的地方原子时计算中采用该方法。     

失真仪误差分析和检定问题

本文通过大量的实验数据,详细分析了失真仪的各种误差,指出了影响失真仪质量的原因,提出了合理判定仪器质量的方法和建议,为厂家提供了改进设计的思路。     

NIM4#铯冷原子喷泉钟新一代时间频率基准

回顾了NIM4 #钟实现 5 μK冷原子云 ,74cm原子喷泉和 0 95Hz线宽Ramsey跃迁实验 ,报道了 9 19GHz微波锁定到铯原子秒定义跃迁 ,频率稳定性达到 (5 - 7)× 10 -15(15 0 0 0s)。目前我们正在进行不确定度评估 ,可望不确定度进入 10 -15量级 ,建立我国新一代时间频率基准装置。     

制造误差对气体静压轴承涡流力矩影响分析方法研究

 采用有限元方法研究了制造误差对狭缝节流气体静压轴颈—止推轴承的涡流力矩的影响。对于轴颈—止推相连结构的气体轴承,通过相容变换进行统一编程计算;在离散化过程中,利用加权余量法将二阶偏微分方程降低一阶,放松了对插值函数连续度的要求,便于借助有限元技术分析狭缝节流气体静压轴承的流场参数。分析了狭缝气膜宽度误差和轴颈圆度误差对涡流力矩的影响,以及轴颈的不同安装角度、偏心等因素对涡流力矩的影响。经对比验证,有限元计算结果与实测结果基本一致,研究结果对于气体静压轴颈—止推轴承的设计、装配优化和性能预测有重要指导意义。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

安装误差角对陀螺加速度表的误差模型的影响

在已建立的陀螺加速度表误差模型的基础上,分析在惯性系统中安装误差角对仪表静态误差模型、动态误差模型和混合误差模型的影响。     

实验误差对材料参数实验结果影响的估计方法及其指标

 本文讨论了造成材料参数实验结果分散性的两个来源,给出了估计实验误差对实验结果影响的一般分析方法,提出了评价这种影响的几个指标。本文给出的例子表明这一方法是合理的和有效的。     

基于PCI总线的LXI B类接口模块设计

介绍了在LXI C类接口模块的基础上,设计的基于PCI总线的LXI B类接口模块。重点解决了基于IEEE1588协议的LXI精密时钟同步技术。在模块设计中采用了FPGA对时间信息加盖时戳和直接获取网络数据包的方法,以提高系统的定时精度。该模块可以与传统仪器组合,构成低成本、高性能的LXI仪器。